{"title":"Supercharger Porting \u0026 Rebuild Services","description":"\u003cp\u003eShop supercharger porting, snout service, rebuild, and related performance services. Review core, shipping, turnaround, supported supercharger, and service-stage requirements before purchase.\u003c\/p\u003e","products":[{"product_id":"kong-performance-cnc-ported-lt4-supercharger-snout","title":"Kong Performance CNC Ported LT4 Supercharger \u0026 Snout","description":"\u003ch2\u003eKong LT4 CNC Supercharger Porting Service\u003c\/h2\u003e\u003cp\u003eMaximize airflow from your customer-supplied factory LT4 supercharger and snout with Kong Performance’s proven CNC porting service. Kong’s current port geometry is developed, simulated, tested, and machined in-house on 5-axis CNC equipment for repeatable results across C7 Corvette Z06, Gen 6 Camaro ZL1, Cadillac CTS-V3, and other LT4-powered combinations.\u003c\/p\u003e\u003cp\u003eKong reports typical gains of approximately 40–80 rear-wheel horsepower from the base porting service on properly supported combinations. The optional Stage X machining package can provide additional airflow potential for more aggressive builds. Actual power depends on pulley ratio, throttle body, intake, exhaust, fuel system, calibration, engine combination, and operating conditions; gains are not guaranteed.\u003c\/p\u003e\u003ch3\u003eWhat is included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCNC porting of the customer-supplied LT4 supercharger\u003c\/li\u003e\n\u003cli\u003eCNC porting of the LT4 snout\u003c\/li\u003e\n\u003cli\u003eCNC-machined snout water passages at no additional charge\u003c\/li\u003e\n\u003cli\u003eInspection of the submitted components for suitability before machining\u003c\/li\u003e\n\u003cli\u003eTypical Kong processing time of approximately 3–5 business days after receipt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional Stage X upgrade\u003c\/h3\u003e\u003cp\u003eStage X adds supplemental CNC machining developed through airflow simulation, dyno testing, and track validation. Kong positions the upgrade for high-output factory 1.7L LT4 combinations with the fuel system, airflow, engine, and calibration to support the added capacity. Stage X is sold separately and must accompany an eligible base porting service.\u003c\/p\u003e\u003ch3\u003eCustomer preparation and shipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove sensors, loose fittings, and gaskets unless SMG provides different instructions.\u003c\/li\u003e\n\u003cli\u003eClean residual fluids and protect every opening from debris.\u003c\/li\u003e\n\u003cli\u003ePack the unit securely on all sides using dense material; do not use loose packing peanuts.\u003c\/li\u003e\n\u003cli\u003eUse a trackable carrier and do not ship until SMG provides the current service authorization and routing instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTransit time is separate from the advertised processing estimate. Cleaning, repairs, damaged parts, bearing work, or additional disassembly may add cost and time. Contact SMG for help choosing pulleys, hubs, throttle bodies, fueling, cooling, and calibration support for a complete LT4 package.\u003c\/p\u003e\u003ch3\u003eRecommended service add-ons\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/smgspeed.com\/products\/kong-performance-stage-x-port-add-on\"\u003eKong Stage X Port Add-On\u003c\/a\u003e — supplemental CNC machining for eligible high-output LT4 combinations.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/smgspeed.com\/products\/kong-performance-full-snout-rebuild\"\u003eKong Full Snout Rebuild\u003c\/a\u003e — bearing inspection and rebuild while the unit is already at Kong.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReturn shipping\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for shipping the prepared supercharger to Kong Performance. Checkout collects UPS Ground return shipping from Kong’s Pennsylvania facility to the customer using the packed blower weight and the saved foam-lined LT4 shipping container. SMG supplies the return label after service is complete.\u003c\/p\u003e","brand":"Kong Performance","offers":[{"title":"Default Title","offer_id":54850013692223,"sku":"KONG-PORT-LT4","price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/kong-lt4-cnc-porting_7bc87bde-3346-45c4-a9ca-6c4b62988370.jpg?v=1785586190"},{"product_id":"kong-performance-cnc-porting-service-for-magnuson-lt4-tvs2650","title":"Kong Performance CNC Porting Service for Magnuson LT4 TVS2650","description":"\u003ch2\u003eKong CNC Porting for the Magnuson LT4 TVS2650\u003c\/h2\u003e\u003cp\u003eUnlock the airflow potential of your customer-supplied Magnuson LT4 TVS2650 supercharger with Kong Performance’s precision CNC porting service. Kong develops, tests, and machines its port designs in-house using advanced airflow modeling and 5-axis CNC equipment, producing a consistent finish that cannot be duplicated by a basic hand cleanup.\u003c\/p\u003e\u003cp\u003eThis service is intended for performance LT4 combinations that already have—or are being built with—the supporting airflow, fuel-system, calibration, and drivetrain upgrades needed to benefit from a ported TVS2650. Kong reports gains exceeding 80 rear-wheel horsepower in properly supported back-to-back combinations. Actual results depend on pulley ratio, throttle body, intake, exhaust, fuel system, engine combination, calibration, operating conditions, and the vehicle’s starting configuration; horsepower gains are not guaranteed.\u003c\/p\u003e\u003ch3\u003eService highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional CNC porting of a customer-supplied Magnuson LT4 TVS2650\u003c\/li\u003e\n\u003cli\u003ePort geometry developed specifically for high-performance TVS-style superchargers\u003c\/li\u003e\n\u003cli\u003e5-axis CNC machining for repeatable port shape and surface consistency\u003c\/li\u003e\n\u003cli\u003eDesigned to reduce inlet restriction and improve supercharger airflow\u003c\/li\u003e\n\u003cli\u003eTypical Kong processing time of approximately 3–7 business days after the correctly prepared unit is received\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore shipping your supercharger\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove all sensors, loose fittings, and gaskets unless SMG provides different instructions for your order.\u003c\/li\u003e\n\u003cli\u003eDrain or clean any residual fluids and protect every opening from contamination.\u003c\/li\u003e\n\u003cli\u003eWrap and support the supercharger on every side with dense packing material.\u003c\/li\u003e\n\u003cli\u003eDo not use loose packing peanuts.\u003c\/li\u003e\n\u003cli\u003eUse a sturdy container suitable for the weight of a complete supercharger. A compatible molded shipping container may be purchased separately.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow the SMG service process works\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePlace the porting-service order through SMG Speed.\u003c\/li\u003e\n\u003cli\u003eSMG will provide the service authorization and current shipping instructions.\u003c\/li\u003e\n\u003cli\u003eShip the prepared supercharger using a trackable UPS, FedEx, or DHL service.\u003c\/li\u003e\n\u003cli\u003eKong completes the CNC work and returns the finished unit through the arranged service order.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Do not ship the supercharger until you receive the order-specific instructions from SMG. Transit time is separate from Kong’s estimated shop turnaround. Additional cleaning, disassembly, damaged hardware, repairs, or rebuild work may require added time and cost.\u003c\/p\u003e\u003ch3\u003eRecommended supporting components\u003c\/h3\u003e\u003cp\u003eDepending on the combination, consider the appropriate GripTec pulley, pulley hub, throttle body, intake, belt-drive components, fuel-system upgrades, cooling upgrades, and professional calibration. Contact SMG if you need help selecting a pulley ratio or building a complete Magnuson LT4 TVS2650 package.\u003c\/p\u003e\u003ch3\u003eRecommended service add-on\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/smgspeed.com\/products\/kong-performance-full-snout-rebuild\"\u003eAdd the Kong Full Snout Rebuild\u003c\/a\u003e if you want the eligible snout bearings inspected and serviced while the Magnuson TVS2650 is already at Kong.\u003c\/p\u003e\u003ch3\u003eReturn shipping\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for shipping the prepared supercharger to Kong Performance. Checkout collects UPS Ground return shipping from Kong’s Pennsylvania facility to the customer using the packed blower weight and the saved foam-lined LT4 shipping container. SMG supplies the return label after service is complete.\u003c\/p\u003e","brand":"Kong Performance","offers":[{"title":"Default Title","offer_id":54850014150975,"sku":"KONG-PORT-MAG-LT4-2650","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/kong-magnuson-lt4-tvs2650-cnc-porting_0e6cd009-449c-4fcc-92c5-37b82680f9af.png?v=1785585936"},{"product_id":"kong-performance-cnc-porting-service-for-vmp-gen3r-supercharger","title":"Kong Performance CNC Porting Service for VMP Gen3R Supercharger","description":"\u003cp\u003eIf you are looking to maximize the airflow through your VMP Gen3R Kong Performance has you covered. Our supercharger port designs are developed based on many years of supercharger record breaking experience. All port designs are created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! 40-80rwhp proven gains!!!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFAST TURN AROUND! We typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe process is simple!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003cbr data-mce-fragment=\"1\"\u003eBe sure to remove all sensors and gaskets please!\u003cbr data-mce-fragment=\"1\"\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eShip to address:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eKong Performance\u003cbr data-mce-fragment=\"1\"\u003e8 Smithbridge Rd.\u003cbr data-mce-fragment=\"1\"\u003eChester Heights, PA 19017\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850876768575,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785594820220.jpg?v=1785594822"},{"product_id":"kong-max-effort-cnc-porting-service-for-kong-hellcat-2650-supercharger","title":"KONG MAX EFFORT CNC Porting Service for KONG Hellcat 2650 Supercharger","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your Kong Hellcat 2650 supercharger, Kong Performance has you covered with our full CNC porting service, we can completely max out the KONG 2650 casting. Every casted aluminum supercharger will leave some room for improvement and optimizing. If you are looking you are looking to get all out performance from your Kong 2650, our FULL CNC service will optimize every aspect of the unit. Included in this service is CNC machining the snout and blower inlet for maximum airflow with minimal restrictions. Our supercharger port designs are based on years of pushing the bar while breaking record after record on the HEMI, LSX, and LTX platforms. All ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer\u003c\/strong\u003e: We generally see significant gains with this service when you are in the range of 950+RWHP. If you are not sure if this service will benefit your setup, Please email us first to discuss if this will be beneficial for your engine combination. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 5-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850876997951,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785594839267.jpg?v=1785594843"},{"product_id":"kong-performance-cnc-porting-service-for-mercury-racing-400r-l6-supercharger","title":"Kong Performance CNC Porting Service for Mercury Racing 400R L6 Supercharger","description":"\u003cp\u003e\u003cstrong\u003eKong CNC Porting Service for Mercury Racing 400R L6 Supercharger\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your 400R Verado supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of hand porting experience. All of our latest ports were designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software!\u003c\/p\u003e\n\u003cp\u003ePROVEN HP gains with our ported superchargers being used at the 2024 LOTO shootout on the fastest ever center console running a record setting 128mph!\u003c\/p\u003e\n\u003cp\u003eThe process is simple and FAST!\u003c\/p\u003e\n\u003cp\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger(s). Make sure each supercharger is padded well on all sides. (Do not use packing peanuts)\u003cbr\u003eBe sure to remove all sensors and gaskets please!\u003cbr\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850881519935,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785594887992.png?v=1785594890"},{"product_id":"kong-performance-2023-raptor-r-cnc-supercharger-porting","title":"Kong Performance 2023+ Raptor R CNC Supercharger Porting","description":"\u003cp\u003eIf you are looking to maximize the airflow through your 2023+ Raptor R supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of CNC Supercharger porting experience. All of our latest ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Machined Features: \u003c\/strong\u003e(Seen in pictures also)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized inlet for unrestricted inlet flow for up to 108mm throttle body.\u003c\/li\u003e\n\u003cli\u003eUnique CNC ported discharge area for better rotor discharge airflow\u003c\/li\u003e\n\u003cli\u003eCNC Ported runners from top to bottom with unique velocity transitions built into the top of the ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-5 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove ALL sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850881651007,"sku":null,"price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785594892479.jpg?v=1785594894"},{"product_id":"custom-powder-coating-for-kong-performance-billet-supercharger-lid","title":"Custom Powder coating for Kong Performance Billet Supercharger Lid","description":"\u003cp\u003eCustom Powder coating for Kong Performance Billet Supercharger Lid\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis service is intended to accompany the compatible base product or porting order unless the description specifically states that it may be purchased by itself. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850881683775,"sku":null,"price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785594896728.png?v=1785594898"},{"product_id":"kong-performance-cnc-porting-service-for-magnuson-lsa-tvs2650","title":"Kong Performance CNC Porting Service for Magnuson LSA TVS2650","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your Magnuson LSA TVS 2650, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of TVS Style Superchargers. All ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! \u003cstrong\u003eWe have seen\u003c\/strong\u003e \u003cstrong\u003e80+rwhp proven gains in back to back testing with proper supporting mods!!!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850882437439,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785594986505.jpg?v=1785594988"},{"product_id":"kong-performance-cnc-porting-for-s650-whipple-gen-6-3-0l-whipple-supercharger","title":"Kong Performance CNC Porting for S650 Whipple Gen 6 3.0L Whipple Supercharger","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you are looking to maximize the airflow through your \u003c\/span\u003e\u003cspan\u003eGen6 3.0L Whipple Supercharger for the all new S650 kit, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of supercharged vehicles. All ports were designed, created, tested, and programmed on our 5 axis CNC in house using our proprietary port design methods!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850882699583,"sku":null,"price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595027391.jpg?v=1785595029"},{"product_id":"kong-performance-cnc-supercharger-porting-harrop-lsa-tvs-2650","title":"Kong Performance CNC Supercharger Porting Harrop LSA TVS 2650","description":"\u003cp\u003eIf you are looking to maximize the airflow through your Harrop LSA TVS 2650 supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of hand porting experience. All of our latest ports were designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850882765119,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595037430.jpg?v=1785595039"},{"product_id":"kong-performance-cnc-porting-service-for-magnuson-lpe-c8-tvs-2650-supercharger","title":"Kong Performance CNC Porting Service for Magnuson\/LPE C8 TVS 2650 Supercharger","description":"\u003cp\u003eIf you are looking to maximize the airflow through your Magnuson\/Lingenfelter TVS 2650 for the C8, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of TVS Style Superchargers. All ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! \u003cstrong\u003eWe have seen\u003c\/strong\u003e \u003cstrong\u003e80+rwhp proven gains in back to back testing with proper supporting mods!!!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850882797887,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595040655.jpg?v=1785595042"},{"product_id":"kong-performance-cnc-porting-service-for-roush-tvs2650","title":"Kong Performance CNC Porting Service for Roush TVS2650","description":"\u003cp\u003eIf you are looking to maximize the airflow through your Roush TVS2650 supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of hand porting experience. All of our latest ports were designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850882830655,"sku":null,"price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595045426.jpg?v=1785595047"},{"product_id":"kong-stage-x-port-upgrade","title":"Kong Stage X Port Upgrade","description":"\u003cp\u003eThis product is only to be purchased if you are sending in a Kong ported Supercharger to get upgraded to the Kong Stage X port. We do not offer a Stage X option for every style supercharger.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure if a Stage X option is available for your application, please send an email to greg@kongperformance.com with any questions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850883191103,"sku":null,"price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595064315.jpg?v=1785595066"},{"product_id":"kong-performance-cnc-supercharger-porting-jaguar-tvs-1900","title":"Kong Performance CNC Supercharger Porting Jaguar TVS 1900","description":"\u003cp\u003eIf you are looking to maximize the airflow through your Jaguar TVS1900 supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of hand porting experience. All of our latest ports were designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850883223871,"sku":null,"price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595067985.jpg?v=1785595069"},{"product_id":"kong-max-effort-cnc-porting-service-for-lsa-ls9-kong-2650-supercharger","title":"KONG MAX EFFORT CNC Porting Service for LSA\/LS9 KONG 2650 Supercharger","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your LSA\/LS9 Kong 2650 supercharger, Kong Performance has you covered with our full CNC porting service, we can completely max out the KONG 2650 casting. Every casted aluminum supercharger will leave some room for improvement and optimizing. If you are looking you are looking to get all out performance from your Kong 2650, our FULL CNC service will optimize every aspect of the unit. Included in this service is CNC machining the snout, blower inlet, and intake runners for maximum airflow with minimal restrictions. Our supercharger port designs are based on years of pushing the bar while breaking record after record on the LSX and LTX platforms. All ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software!\u003c\/p\u003e\n\u003cp\u003e***120mm Inlet. This Porting service opens the snout to 120mm inlet, which allows you to bolt on our 120mm Billet Drive By wire throttle to optimize inlet flow a step further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer\u003c\/strong\u003e: We generally only see significant gains with this service when you are in the range of 950+RWHP. If you are not sure if this service will benefit your setup, Please email us first to discuss if this will be beneficial for your engine combination. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 5-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850883322175,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595091166.jpg?v=1785595093"},{"product_id":"kong-cnc-supercharger-porting-for-hellcat-demon-trackhawk-trx-redeye-snout-bearing-plate-max-effort-full-port","title":"Kong CNC Supercharger Porting for Hellcat \/ Demon \/ Trackhawk \/ TRX \/ Redeye (Snout + Bearing plate \/ Max Effort Full Port)","description":"\u003cp\u003eKong CNC Supercharger Porting with optional Bearing Plate Porting for Hellcat \/ Demon \/ Trackhawk \/ TRX \/ Redeye\u003c\/p\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your \u003cspan\u003eHellcat \/ Demon \/ Trackhawk \/ TRX \/ Redeye Supercharger\u003c\/span\u003e, Kong Performance has you covered. Our port designs are based on years of hand porting experience. All of our latest ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your parts back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with the parts that are getting ported. Make sure the parts iare padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850883354943,"sku":null,"price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595095617.jpg?v=1785595098"},{"product_id":"kong-cnc-supercharger-porting-for-hellcat-demon-trackhawk-trx-redeye-snout-only","title":"Kong CNC Supercharger Porting for Hellcat \/ Demon \/ Trackhawk \/ TRX \/ Redeye (Snout Only)","description":"\u003cp\u003eKong CNC Supercharger Porting with optional Bearing Plate Porting for Hellcat \/ Demon \/ Trackhawk \/ TRX \/ Redeye\u003c\/p\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your \u003cspan\u003eHellcat \/ Demon \/ Trackhawk \/ TRX \/ Redeye Supercharger\u003c\/span\u003e, Kong Performance has you covered. Our port designs are based on years of hand porting experience. All of our latest ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your parts back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with the parts that are getting ported. Make sure the parts iare padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850883420479,"sku":null,"price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595099329.jpg?v=1785595101"},{"product_id":"snout-rebuild-only-no-snout-porting","title":"Snout Rebuild Only (No Snout Porting)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis service includes disassembly\/reassembly, and inspection of Hellcat, Demon, LSA, LS9, LT4, Whipple, Edelbrock, supercharger snouts with newly installed front and rear bearings. Input shafts and hubs can be replaced as well for an extra charge. Please email for a quote if the snout needs more than just bearings.\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850885222719,"sku":null,"price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595149826.jpg?v=1785595151"},{"product_id":"full-supercharger-rebuild-no-supercharger-porting","title":"Full Supercharger Rebuild (No Supercharger Porting)","description":"\u003cp\u003eLSA, LS9,  LT4, LT5, Hellcat and most all OEM style Superchargers.\u003cbr\u003e\u003cbr\u003eThis service includes new snout bearings, new case bearings, full inspection of the case and rotors, and new supercharger oil. \u003c\/p\u003e\n\u003cp\u003eAftermarket Supercharger Rebuilds may vary in pricing. Please email us for quotes on rebuilds for aftermarket superchargers. \u003c\/p\u003e\n\u003cp\u003eThis price is subject to change if there is extensive damage to the unit. We will reach out prior to work being completed if additional services are required. \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850885255487,"sku":null,"price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595155219.jpg?v=1785595157"},{"product_id":"kong-performance-cnc-porting-for-2-9l-whipple-supercharger","title":"Kong Performance CNC Porting for 2.9L Whipple Supercharger","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf you are looking to maximize the airflow through your 2.9\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eL Whipple Supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of supercharged vehicles. All ports were designed, created, tested, and programmed on our 5 axis CNC in house using our proprietary port design methods!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis port is only recommended if you intend to spin the supercharger at 13,000 RPM or above for best results. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKong Performance\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850885321023,"sku":null,"price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595162077.jpg?v=1785595163"},{"product_id":"kong-performance-cnc-porting-service-for-vmp-odin-supercharger","title":"Kong Performance CNC Porting Service for VMP Odin Supercharger","description":"If you are looking to maximize the airflow through your VMP Odin  TVS 2650, Kong Performance has you covered. Our supercharger port designs are developed based on many years of supercharger record breaking experience. All port designs are created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! 40-80rwhp proven gains!!!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFAST TURN AROUND! We typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe process is simple!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003cbr data-mce-fragment=\"1\"\u003eBe sure to remove all sensors and gaskets please!\u003cbr data-mce-fragment=\"1\"\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eShip to address:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eKong Performance\u003cbr data-mce-fragment=\"1\"\u003e8 Smithbridge Rd.\u003cbr data-mce-fragment=\"1\"\u003eChester Heights, PA 19017\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850885353791,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595164665.jpg?v=1785595166"},{"product_id":"kong-performance-cnc-porting-for-gen5-3-8l-whipple-supercharger-2020-gt500-hellcat-ltx-lsx-mustang-coyote-f150","title":"Kong Performance CNC Porting for Gen5 3.8L Whipple Supercharger (2020+ GT500, Hellcat, LTX, LSX, Mustang Coyote, F150)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eIf you are looking to maximize the airflow through your \u003c\/span\u003e\u003cspan\u003eGen5 3.8L Whipple Supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of supercharged vehicles. All ports were designed, created, tested, and programmed on our 5 axis CNC in house using our proprietary port design methods!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e This port is recommended if you intend to spin the supercharger at 13,000 RPM or above for best results. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850890006847,"sku":null,"price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595194632.png?v=1785595196"},{"product_id":"kong-performance-cnc-porting-for-gen5-gen6-3-0l-3-8l-whipple-supercharger","title":"Kong Performance CNC Porting for Gen5\/Gen6 3.0L\/3.8L Whipple Supercharger","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eIf you are looking to maximize the airflow through your \u003c\/span\u003e\u003cspan\u003eGen5 3.0L Whipple Supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of supercharged vehicles. All ports were designed, created, tested, and programmed on our 5 axis CNC in house using our proprietary port design methods!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur port work includes opening the snout inlet to \u003cstrong\u003e120mm\u003c\/strong\u003e to accept larger throttle bodies. After the snout is machined, we open up the case inlet to match the snout and do extensive machine work to maximize getting all the air into the Gen5 3.0 rotor pack to make maximum power. This port is recommended if you intend to spin the supercharger at 13,000 RPM or above for best results. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850890334527,"sku":null,"price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595198020.png?v=1785595200"},{"product_id":"kong-performance-cnc-porting-service-for-all-edelbrock-tvs-2650","title":"Kong Performance CNC Porting Service for all Edelbrock TVS 2650","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your Edelbrock TVS 2650, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of TVS Style Superchargers. All ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! \u003cstrong\u003e40-80rwhp proven gains!!!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850891317567,"sku":null,"price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595222416.jpg?v=1785595225"},{"product_id":"kong-performance-cnc-porting-service-for-magnuson-hot-rod-style-hellcat-ls-tvs-2650","title":"Kong Performance CNC Porting Service for Magnuson Hot Rod Style Hellcat\/LS TVS 2650","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eIf you are looking to maximize the airflow through your Magnuson Top mount TVS 2650, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of TVS Style Superchargers. All ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! \u003cstrong\u003e40-80rwhp proven gains!!!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/kongperformance.com\/collections\/cnc-supercharger-porting-for-lt4-lsa-ls9-applications\/products\/custom-shipping-container-for-lsa-ls9-lt4-supercharger?variant=11972689887276\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850891350335,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595226033.jpg?v=1785595227"},{"product_id":"full-supercharger-rebuild","title":"Full Supercharger Rebuild","description":"\u003cp\u003eThis service includes new snout bearings, new case bearings, full inspection of the case and rotors, and new supercharger oil. \u003c\/p\u003e\n\u003cp\u003e(This is an add on service to CNC Supercharger Porting)\u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis service is intended to accompany the compatible base product or porting order unless the description specifically states that it may be purchased by itself. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850891383103,"sku":null,"price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595229241.jpg?v=1785595231"},{"product_id":"kong-performance-2020-gt500-cnc-supercharger-porting","title":"Kong Performance 2020+ GT500 CNC Supercharger Porting","description":"\u003cp\u003eIf you are looking to maximize the airflow through your 2020+ GT500 supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of Supercharger porting experience. All of our latest ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Machined Features: \u003c\/strong\u003e(Seen in pictures also)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized inlet for unrestricted inlet flow for up to 108mm throttle body.\u003c\/li\u003e\n\u003cli\u003eUnique CNC ported discharge area for better rotor discharge airflow\u003c\/li\u003e\n\u003cli\u003eCNC Ported runners from top to bottom with unique velocity transitions built into the top of the ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FIRST TO THE 9S AND THE 8S, AND STILL THE FASTEST!\u003c\/strong\u003e We have our Kong ported 2020 GT500 Supercharger on the Quickest and Fastest 2020 GT500 in the world with a \u003cstrong\u003e8.8@158mph\u003c\/strong\u003e in the quarter mile.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-5 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove ALL sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eOrder this service through SMG\u003c\/h3\u003e\u003cp\u003eThis listing covers service work on a customer-supplied component. Place the order through SMG Speed and wait for the order-specific authorization and shipping instructions before sending any parts. SMG’s instructions supersede any manufacturer-direct checkout, email, or ship-to language retained above for technical reference.\u003c\/p\u003e\u003ch3\u003eService shipping and timing\u003c\/h3\u003e\u003cp\u003eThe customer is responsible for securely shipping the clean, drained, and correctly prepared component to the service location. Remove loose sensors, fittings, and gaskets unless SMG instructs otherwise; do not use loose packing peanuts. Advertised shop turnaround begins after the correct component is received and inspected, and does not include transit time, cleaning, repairs, or additional disassembly. Return shipping is calculated at checkout when the service requires the component to be shipped back.\u003c\/p\u003e\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\u003cp\u003ePower gains and results depend on the complete engine, pulley ratio, airflow, cooling, fuel system, calibration, and operating conditions. Verify the exact supercharger model and required supporting components before ordering; stated gains are not guaranteed.\u003c\/p\u003e","brand":"KONG Performance","offers":[{"title":"Default Title","offer_id":54850892562751,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/2041\/6831\/files\/upload-1785595335450.jpg?v=1785595337"}],"url":"https:\/\/smgspeed.com\/collections\/supercharger-porting-rebuild-services.oembed","provider":"SMGspeed","version":"1.0","type":"link"}