Lowering Springs
Showing 1–21 of 70 results
- Sale!
- Lowering Springs
EIBACH 10+ Camaro 6.2L Pro Kit Suspension System
10-12 Camaro 6.2L Pro Kit Suspension System
(0 reviews) - Lowering Springs
EIBACH 10-12 Camaro 3.6L Pro Kit Suspension System
10-12 Camaro 3.6L Pro Kit Suspension System
(0 reviews) - Lowering Springs
BMR 10-15 5th Gen Camaro V8 Lowering Spring Kit (Set Of 4) – Red
There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 2010 – 2015 Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.
These springs will lower your Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Lowers your V-8-equipped 2010 – 2015 Camaro 1.25-inchs;Improves handling and ride quality;220 lb/in front, 460 lb/in rear spring rate;Lower center of gravity;Increased driver control;decreases body roll;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Fits V8 Models Only;Made in the U.S.A.(0 reviews) - Lowering Springs
BMR 10-15 5th Gen Camaro V6 Rear Lowering Springs – Red
There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.
These springs will lower the rear of your Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Lowers the rear of your V-6-equipped 2010 – 2015 Camaro 1.2-inches;Improves handling and ride quality;430 lb/in spring rate;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Fits V6 Models Only;Made in the U.S.A.(0 reviews) - Lowering Springs
Eibach Pro-Kit 2016+ Chevrolet Camaro SS 1LE
Tested with factory dampers (including magnetic ride)
(0 reviews) - Lowering Springs
Pedders 2004-2006 Pontiac GTO Rear Coil Spring Stock Height – Single
Pedders Heavy Duty Coil Springs are built to ISO 9001 standards with tolerance of only +/-2mm at loaded height and have unrivalled levels of comfort, handling and load carrying ability.
COIL SPRING – REAR – PONTIAC GTO 2004-2006 – HEAVY DUTY
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
PONTIAC GTO 2004-2006(0 reviews) - Lowering Springs
Pedders 08-13 Subaru Forester SH SportsRyder Low Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – SUBARU FORESTER SH 2009-2013 – LOW
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
SUBARU FORESTER SH 2009-2013(0 reviews) - Lowering Springs
Pedders 97-02 Subaru Forester SF SportsRyder Low Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – SUBARU FORESTER SF 1998-2002 – LOW
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
SUBARU FORESTER SF 1997-2992(0 reviews) - Lowering Springs
Pedders 02-08 Subaru Forester SG SportsRyder Low Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – SUBARU FORESTER SG 2003-2008 – LOW
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
SUBARU FORESTER SG 2003-2008(0 reviews) - Lowering Springs
Pedders 04-06 Pontiac GTO SportsRyder Super Low Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – PONTIAC GTO – X-LOW
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
PONTIAC GTO 2004-2006(0 reviews) - Lowering Springs
Pedders 08-09 Pontiac G8 SportsRyder Super Low Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – PONTIAC G8 – X-LOW
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
PONTIAC G8 2008-2009(0 reviews) - Lowering Springs
Pedders 04-06 Pontiac GTO SportsRyder FE2 Height Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – PONTIAC GTO FE2
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
PONTIAC GTO 2004-2006(0 reviews) - Lowering Springs
Pedders 04-06 Pontiac GTO V6 SportsRyder Low Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – PONTIAC GTO 2004-2006 – LOW
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
PONTIAC GTO 2004-2006(0 reviews) - Lowering Springs
Pedders 05-14 Ford Mustang SportsRyder Low Springs
Pedders SportsRyder Coil Springs are Pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
SPRING KIT – MUSTANG S197 – LOW
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
FORD MUSTANG S197 2005-2014(0 reviews) - Lowering Springs
Pedders Rear Spring Low 2005-2014 Mustang EACH
Pedders SportsRyder Coil Springs are pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
2005-2014, Ford, Mustang(0 reviews) - Lowering Springs
Pedders Urethane Rear Spring Spacer 10mm 2004-2006 GTO
Pedders polyurethane bushings are designed to allow flexibility of movement of the entire suspension while maintaining correct mounting and alignment of individual parts. Pedders polyurethane bushes boast superior design and chemistry characteristics to ensure necessary durability, performance and comfort as its required. Suspension components can influence both the ride quality, steering feel, as well as the grip of the tyres, performance of the brakes, and stability of the shock absorbers. Should these suspension components be worn, an unpredictable and more to the point unsafe motor vehicle can be the result.
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
2004-2006, PONTIAC, GTO(0 reviews) - Lowering Springs
Pedders Front Spring Low V6 2004-2006 GTO
Pedders SportsRyder Coil Springs are pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
2004-2006, PONTIAC, GTO(0 reviews) - Lowering Springs
Pedders Front Spring Low V8 2004-2006 GTO EACH
Pedders SportsRyder Coil Springs are pedders premium range of lowered Coil Springs for sports and performance applications. Built to ISO 9001 standards with tolerance of only +/-2mm at loaded height. Pedders SportsRyder Coil Springs are simply unrivalled in terms of handling, vehicle appearance and performance. Coil Spring design and manufacturing is a craft which requires strict adherance to a demanding series of procedures, all of which are critical to the performance of the final product.
Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world’s roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA’s G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our ‘supercars’ are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.
2004-2006, PONTIAC, GTO(0 reviews)
