APR 19-26 Audi/Volkswagen EA888.3/3B/4/4B (MQB/MQB EVO/MQB AX) 1.8T/2.0T Open Air Intake System

The APR Open Intake System is here for the 2.0T EA888.3/3B engine found in the Volkswagen MK6 Polo GTI (Typ AW) and Audi MK2 A1 (Typ GB)! The system also fits other 1.8T / 2.0T EA888.3 / 3B / 4 / 4B engines found in MQB, MQB EVO, and MQB Ax platform vehicles making it a perfect low cost option for nearly any setup!The APR Open Intake System features a straight through filter design with minimal twists and bends for maximum flow and minimal pressure drop. Our proprietary washable and reusable cotton gauze high flow filter flows 22% more than stock at various depressions, registers less pressure drop at each depression, has 20% more surface area compared to stock, and uses a filter substrate material proven on other APR intake systems proven to provide the necessary filtration to last a lifetime.The filter's unique design allows for air to be fed from the front and sides of the filter with minimal restriction due to its shape and size. The outlet of the filter is massive, registering in at 127mm (5"), which has a cross sectional area 260% larger than the stock tube! Air velocity is accelerated through the system as it smoothly transitions to the factory back tube where the system either connects directly to the factory MAF housing, or to our back tube adapter, depending on engine. In either scenario, the transition is simple and clean for a perfect fit while promoting maximum flow.The heatshield and inlet pipe is made from a glass filled polypropylene material that acts as an excellent heat deflection barrier to minimize inlet temps compared to no shield at all. The airbox is fed with fresh air from the frontal inlet ducting, rather than the surrounding engine bay, or radiator, keeping the system constantly fed with cool incoming air to satisfy the turbochargers needs under even the most demanding situations. The system literally installs in minutes too as it simply pops into place on the factory mounting pegs!

• Airbox design captures frontal inlet air and reduces suction from engine bay and radiator
• TUV approved for the target platform and emissions friendly VIA APR Germany
• 20% larger than stock filter with frontal inlet and 127mm (5”) outlet
• Straight through design with no sharp or harsh bends and restrictions
• Washable and reusable high-flow pleated cotton gauze filter
• Filter outlet stack increases air velocity to maximize flow
• 127mm (5”) filter transition is 260% larger than stock
• Better throttle and turbo response compared to stock
• Fits most MQB, MQB EVO, and MQB Ax platform vehicles
• Less strain on factory components compared to stock
• Fits most 1.8T / 2.0T EA888.3 / 3B / 4 / 4B engines
• Designed specifically for the Polo GTI / Audi A1
• Minimal twists and bends further maximizes flow
• Enhanced engine and turbocharger sounds
• Supports both MAF and non-MAF engines
• Filter flows 22% more than stock
• Lower pressure drop than stock
• Simple and easy install
• Open Airbox Design

This Part Fits: