BTR LS7 Stage 2 V2 Camshaft
Brian Tooley Racing LS7 Stage 2 V2 Camshaft
Moderate idle with a stronger top-end emphasis and some low-speed torque tradeoff. Camshaft only; springs, pushrods and installation components are not included.
- SKU: BTR-LS7STAGE2
- BTR-published duration: 230/25X
- Valve lift: .650/.650 inches; LSA: 116 degrees
- Intake lobe lift at TDC: 0.04900
- Hydraulic roller; three-bolt attachment; naturally aspirated LS7
Engine and vehicle fitment
For compatible LS7 7.0L combinations, including 2006–2013 Chevrolet Corvette Z06 and 2014–2015 Chevrolet Camaro Z/28. Other chassis require a compatible LS7 swap; vehicle selection alone does not establish clearance or installation compatibility.
Required setup checks
BTR specifies its .660-inch Platinum spring kit with titanium retainers and hardened pushrods. Verify piston-to-valve clearance, installed height, coil bind, retainer clearance, pushrod length and calibration. BTR recommends titanium intake valves and a maximum 430-lb open spring pressure.
Shipping estimate: 15 lb, based on BTR’s catalog weight. BTR lists dimensions of 24 × 3 × 3 without units; a provisional 24 × 4 × 4-inch shipping package is used. Final packed measurements may vary.
BTR manufacturer specifications. Manufacturer image is representative.
Compare BTR LS7 cams
Stage 1 V2 camshaft | Stage 3 V2 camshaft | Stage 4 V2 camshaft
Processing & Shipping Overview
Processing occurs before shipping.
Most in-stock items typically process within 2–3 business days before shipment or pickup. Expedited shipping options affect transit time after an order ships and do not speed up processing.
Made-to-order, special-order, vendor drop-ship, and freight items require additional processing time before shipping. Any extended lead times will be noted on the product page when applicable.
For the most up-to-date order status or lead time questions, please contact sales@smgspeed.com or use live chat during business hours.