Kong Performance Hellcat TVS2650

KONG PERFORMANCE HELLCAT TVS 2650

Kong Performance is proud to introduce the Kong HELLCAT TVS2650 Supercharger. No modifications are required for installation. This is meant to be a direct replacement for all 2.4L, 2.7L, and 3.0L IHI Superchargers. The Kong 2650 is a true bolt on, direct swap, 1200+whp capable supercharger!

Details:

The Kong Hellcat 2650 utilizes an EATON TVS2650 rotor pack. The TVS2650 rotors have a high twist, 4-lobe rotor design. This is the largest Eaton TVS Rotor pack on the market. It has been proven to be reliable at very high power levels. 

Supercharger Lid / Intercooler

***This Supercharger does NOT include a lid or intercooler*** The Kong Hellcat 2650 was designed to simply reuse your OEM lid and intercoolers.

Other Information

-Compatible with stock 92mm tb, 108mm, or 130mm throttle.

-Kong HELLCAT 2650 specific supercharger pulleys will be required when purchasing the unit. They can be ordered by clicking this link --->

-Compatible with all Hellcat, TRX, Trackhawk, Demon, Redeye, applications.

Testing Details:

During prototype testing, this supercharger has shown to be capable of 1300whp+ when combined with a capable engine combination. If you are not sure about what pulley to start with to suit your engine combination, please contact us before ordering for assistance.

Please contact us via email at kongperform@gmail.com with additional questions!

Release Video ---> https://www.youtube.com/watch?v=2T8QzQgJP7k&ab_channel=KongPerformance

Testing Results ---> https://www.instagram.com/kongperform/reel/DE5QzaKRB0g/

Engine Dyno ----> https://www.youtube.com/watch?v=EBGomWnsXT0&ab_channel=Scoggin-DickeyPartsCenter

WARRANTY:

There is a 1 year parts warranty on the Kong 2650 supercharger. Any disassembly or aftermarket porting of any kind will immediately void ALL warranty claims.

SMG ordering and fitment notes

This Kong Performance catalog item is supplied for the applications described above. Verify the exact vehicle, engine, supercharger, bolt pattern, finish, pulley ratio, and supporting hardware before ordering. Contact SMG before purchase when the combination is unusual or when the product requires machining, calibration, or another Kong component.

Processing and shipping

Processing occurs before shipping. Kong products may be special-order or vendor-fulfilled and can require additional handling time before carrier pickup. Expedited shipping changes transit time after shipment and does not shorten manufacturing, machining, or order processing. Any product-specific lead time or availability note above takes priority.

Installation responsibility

Performance components should be installed and calibrated by a qualified professional. The purchaser is responsible for verifying compatibility, safe operating limits, emissions legality, and suitability for the intended vehicle and use.