Kong Performance LS9 TVS2650

 KONG LS9 TVS 2650

PLEASE READ ALL DETAILS BELOW BEFORE PLACING AN ORDER, THANK YOU!

Kong Performance is proud to introduce the Kong LS9 TVS2650 Supercharger. The Kong LS9 2650 has the same height as the factory supercharger which means this unit fits under the factory hood with no modifications needed.

Details:

The TVS2650 is equipped with a high twist, 4-lobe rotor design. These rotors are 15% larger than the LS9 TVS 2300 and feature several improvements to maximize efficiency and performance. The TVS 2650 is the largest Eaton TVS Rotor pack on the market.

Supercharger Lid / Intercooler

***This Supercharger does NOT include a lid or intercooler*** The Kong LS9 2650 is machined to retro fit the LS9 style lid. Before and after testing showed no noticeable increase in IATs when compared to the original LS9 Supercharger. 

Other Information

-Compatible with multiple LS throttle body bolt patterns.

-Machined in O-ring to manifold style gaskets allow for easy installation of the supercharger. 

-Kong LS9 2650 specific supercharger pulleys will be required when purchasing the unit. They can be ordered by clicking this link ---> HERE.

Testing Details (Dyno Graph in Images)

The first LS9 vehicle tested was a 388ci LS9 engine. The car baselined at 940rwhp with a ported factory LS9 supercharger and a 2.20" upper. We then swapped on the Kong LS9 2650 and made 1071rwhp with a 2.45" pulley. No other changes. Roughly +130rwhp was achieved while turning the Supercharger slower than the previous setup. See test vehicle and dyno sheet in the images section. 

Please contact us via email at kongperform@gmail.com with additional questions!

WARRANTY:

There is a 1 year parts warranty on the Kong 2650 supercharger. Any disassembly or aftermarket porting of any kind will immediately void ALL warranty claims.

SMG ordering and fitment notes

This Kong Performance catalog item is supplied for the applications described above. Verify the exact vehicle, engine, supercharger, bolt pattern, finish, pulley ratio, and supporting hardware before ordering. Contact SMG before purchase when the combination is unusual or when the product requires machining, calibration, or another Kong component.

Processing and shipping

Processing occurs before shipping. Kong products may be special-order or vendor-fulfilled and can require additional handling time before carrier pickup. Expedited shipping changes transit time after shipment and does not shorten manufacturing, machining, or order processing. Any product-specific lead time or availability note above takes priority.

Installation responsibility

Performance components should be installed and calibrated by a qualified professional. The purchaser is responsible for verifying compatibility, safe operating limits, emissions legality, and suitability for the intended vehicle and use.