Honda HRC Performance Parts: Check the Wheel and Exhaust Application First
Honda Racing Corporation USA has introduced its first HRC Performance Parts program for retail Honda and Acura owners. The initial announcement separates into two application paths: forged wheels for the Civic Type R and Integra Type S, and forged wheels plus a tuned cat-back exhaust for the Passport and Pilot. Honda says sales are planned to begin in March 2027 through Honda and Acura dealerships and Honda DreamShop online. These are announced products, not parts SMG Speed Shop is claiming to stock or sell.
Start with the vehicle, then the hardware
The 19-by-10-inch forged wheel is listed by Honda Racing for the 2023-and-newer Civic Type R and 2024-and-newer Integra Type S. Honda lists a 55 mm offset and a 20.8-pound wheel weight. Those figures describe the HRC wheel; they do not establish that a particular tire, brake package, suspension setup, or aftermarket spacer combination will fit. A buyer should verify the exact model year, wheel and tire package, brake clearance, fasteners, and tire-pressure monitoring requirements through the Honda or Acura sales and installation channel before ordering.
The 18-by-8-inch forged off-road wheel follows a different path. Honda Racing lists it for the 2026-and-newer Passport and 2023-and-newer Pilot, with a 40 mm offset. Owners should check the exact trim, tire size, load requirements, clearance, and any vehicle-specific installation instructions. A wheel that appears similar in diameter is not automatically interchangeable across the two model families.
The Passport and Pilot exhaust is a separate choice
Honda Racing also announced a tuned stainless-steel cat-back exhaust for the 2026-and-newer Passport and 2023-and-newer Pilot. HRC says it developed the system with Borla, specifies 304 stainless-steel construction and factory-hanger installation, and describes its sound and clearance goals. Those are manufacturer statements about this specific system, not a measured result for every vehicle or a promise from SMG. Confirm the model year, trim, factory exhaust layout, towing or accessory interactions, local sound rules, and complete installation instructions with the selling dealer.
Honda also displayed future-part prototypes, including adjustable coilovers, a brake kit, and a short-throw shifter. The announcement does not make those prototypes part of the initial retail lineup. Treat their specifications, fitment, release timing, and purchase availability as unconfirmed until Honda publishes final product details.
What to check before placing an order
- Match the exact application. Use the model, year, trim, and existing wheel or exhaust configuration, not a broad “Honda” or “Acura” label.
- Verify the whole installation. Wheels need compatible tires, brake clearance, hardware, and monitoring components. Exhaust systems need the correct factory connections, hangers, and room for any installed accessories.
- Confirm the sales channel and timing. Honda currently directs this HRC line to its dealerships, Acura dealerships, and Honda DreamShop online, with sales planned for March 2027 after final testing. Recheck the live manufacturer listing before making a purchase plan.
For a build that cannot wait for the HRC retail launch, SMG Speed Shop can help compare currently offered aftermarket wheel and exhaust options using your exact vehicle and installation goals. Share the year, model, trim, current parts, and intended use so the recommendation starts with fitment rather than a headline.
Source: Honda Racing Corporation USA, “Honda Racing to Launch HRC Performance Parts at 2026 SEMA Show; Sales Begin March 2027” (October 22, 2026). Manufacturer plans and specifications may change.